Home About Us Vacuum Pumps Peristaltic Pumps Additional Pumps & Equipment Parts & Accessories Machining Contact Us

Far Products Parts and Accessories

3500 - Jonny Trap Suction & Discharge Hose

Jonny Trap suction and discharge hose for any pumpout system. High quality superior design. It has smooth inside and outside surface. The hose has a low friction loss because of a special processed inner surface. Jonny Trap hose is reinforced so it can be used for up to 85 lbs. of pressure and 30 lbs. of vacuum. The hose is very flexible, corrosion resistant, impact resistant, and complies with all sanitary standards.

3500-1
3500-1 1 5/16" Clear Suction Hose
3500-3 1 1/2" Clear Suction Hose
3500-2
3500-2 1 5/16" Green Suction Hose
3500-4 1 1/2" Green Suction Hose
3500-1
3500-6 20 ft. - 50 ft. suction hose complete setup with deck fittings

3700 Series Jonny Trap Nozzle (Special Reinforced Nozzle End)

Jonny Trap Nozzle is the only nozzle with a patented check valve built into it to stop backflow of any substance. it is made of durable rubber to last longer than other types of rubber or plastic nozzles. Can be used with boat adapters that fit the nozzle, or direct into the deck fittings of the boat. It is reinforced with a special insert on the tapered suction part. No need to worry about nozzle collapse or bending. It will stand up to extremely rough conditions.

3700-1
3700-1 Nozzle
3700-2
3700-2 Nozzle on Male Camlock
3700-3
3700-3 Nozzle 1 1/4" MPT Fitting
3700-4
3700-4 Nozzle 1 1/2" MPT Fitting
3700-4
3700-5 Nozzle on Sight Glass

Jonny Trap Boat Adapters

A special taper to fit the end of a rubber nozzle. The nozzle will fit to a precise fit so no suction loss will occur. Boat adapters 3705 and 3706 are a camlock version and can be used with female camlock on the end of the suction hose. All boat adapters come with special jet cut rubber seal for sealing against deck fitting and not threads. Part number 3707 have straight threads for ease of connecting to deck fitting.

3705
3705
 
3707
3707
 
3703 1 1/2" MPT Taper Nozzle
3704 1 1/4" MPT Taper Nozzle
3705 1 1/2" MPT Male Camlock
3706 1 1/4" MPT Male Camlock
3707 1 1/2" Straight Thread & Taper Nozzle

 

Ball Valve Shutoff

Can be used in any section or discharge line. Precision molded reinforced polypropylene. Handles medium size. Great for on the end of suction hose.

3730 3730-1 1 1/4" FPT Both Ends
3730-2 1 1/2" FPT Both Ends
3730-3 2" FPT Both Ends

4 Bolt Shutoff Ball Valve

Can be used in any suction or discharge line. Precision molded reinforced polypropylene. 4 bolts for extra strength made of stainless steel. Vinton seals, full port.

3731 3731-1 1 1/4" FPT Both Ends
3731-2 1 1/2" FPT Both Ends

6 Bolt Shutoff Ball Valve

Can be used in any suction or discharge line. Precision molded reinforced polypropylene, self aligning ball moves freely against seats. Vinton Seals. Six stainless steel bolts are used for extra strength. Large handle for smooth operation. Full port.

3732 3732-1 2" FPT Both Ends
3732-2 3" FPT Both Ends

90 Shutoff Ball Valves

Can be used on suction end of the hose. 90 with handle for easy holding. Made of reinforced polypropylene. Stainless steel bolts. Long shutoff handle standard with this unit.

3733 3733 1 1/2" FPT Both Ends

Inline Shutoffs

Used in suction, discharge lines and deck hydrants. PVC material and compact design uses less space. Very easy to open and close valve.

3734 3734-1 1 1/2" PVC Both Ends
3734-2 1 1/2" FPT Both Ends

Check Valves

Flapper type check valve which is used in suction and discharge lines of pump. Maintenance Free Operation.

3735 3735-1 1 1/2" FPT x 1 1/2" FPT Clear
3735-2 1 1/2" FPT x 1 1/2" FPT Regular
3735-3 2" FPT x 2" FPT Regular
3735-4 1 1/2" PVC x 1 1/2" PVC Clear
3735-5 1 1/2" PVC x 1 1/2" PVC Regular
3735-6 2" PVC x 2" PVC Regular

Sightglass

Sightglass can be made of many different materials. Jonny Trap pumpouts have standard sightglass with regular SUV sunlight protected material or a special material which is 100% clear and is extra shielded from SUV sunlight Rays to outlast any other products on the market (3835) many sizes available.

3830 3830-1 1 1/2" MPT x 1 1/2" MPT
3830-2 1 1/2" FPT x 1 1/2" FPT
3830-3 1 1/2" MPT x 1 1/2" FPT
3835 3835-1 1 1/2" MPT x 1 1/2" MPT
3835-2 1 1/2" FPT x 1 1/2" FPT
3835-3 1 1/2" MPT x 1 1/2" FPT
3835-4 1 1/4" MPT x 1 1/4" FPT

Hose to Boat Connection

From the least expensive model to the standard model every marina can have the hose to boat connector the way they specify, all models come with shutoff. Either 90 or straight units with sight glass are available. Choose one of the connection units here or call us for your specific need.


3850-1 Hose to boat connection - nozzle - shutoff - hose barb

3850-2 Nozzle - 90 - Shutoff - Hose Barb

3850-3 Nozzle - 90 Shutoff - Sightglass - Hose Barb

3850-4 Nozzle - 90 Elbow - Shutoff - sightglass - hose barb

3850-5 Nozzle - Shutoff - Sightglass - Female Camlock

3850-6 Nozzle - 90 Elbow - Shutoff - Sightglass - Female Camlock

3850-7 Female Camlock - Shutoff - Hose Barb

3850-8 Female Camlock - 90 Elbow - Shutoff - Hose Barb

3850-9 Female Camlock - 90 Elbow - Shutoff - Sightglass - Hose Barb

3850-10 Female Camlock - 90 Elbow - Shutoff - Sightglass - Female Camlock

3850-11 Female Camlock - 90 Elbow - Shutoff - Sightglass - Female Camlock

Filter

Made of PVC with screen that will pass 1" solids - 2 sizes to choose from.

5000 5000-1 Filter - Bowl - Gasket - Screen - 1 1/2" FPT
5000-2 Filter - Bowl - Gasket - Screen - 2" FPT

Bulkhead Fittings

Made of polypropylene. Gaskets are included. For use in tanks or any enclosure to enter or exit. can also order stainless steel. Specify when ordering part.

3740 3740-1 1 1/2" FPT Both Ends
3740-2 2" FPT Both Ends

Pump Flanges & Gaskets

Used on peristaltic pumps at inlet and discharge ports. Made of polypropylene or PVC. Heavy Duty 150 P.S.I. Max. Female pipe threads with a 4 bolt flange. Gaskets are available.

3742 3742-1 1 1/2" FPT to Pump 4 bolt flange
3742-2 2" FPT to Pump 4 bolt flange
3742-3 1 1/2" Gasket
3742-4 2" Gasket

Dock Hydrants

Use where one pumpout unit will be used for pumping out more than one place. It is a one PC unit without gaskets. Four bolts to dock and ready for use. Shutoff, check valve, and camlock with cap all on standard unit. Other styles available.

3746 3746-1 Complete Hydrant

Deck Flanges

Special dsign, 1 PC unit so no need for gaskets. One single part with any type ends desired. Great time saver when installing lines through docks. Any size available on request only 1 1/2" sizes shown.

3745 3742-1 1 1/2" PVC x 1 1/2" PVC
3742-2 1 1/2" PVC x 1 1/2" FPT
3742-3 1 1/2" PVC x 1 1/2" MPT
3742-4 1 1/2" FPT x 1 1/2" PVC
3742-5 1 /12" FPT x 1 1/2" FPT
3742-6 1 1/2" FPT x 1 1/2" MPT
3742-7 1 1/2" MPT x 1 1/2" PVC
3742-8 1 1/2" MPT x 1 1/2" FPT
3742-9 1 1/2" MPT x 1 1/2" MPT

Male Camlock Adapters

All fittings polypropylene and are Standard National Pipe Threads and Camlock dimensions. Stainless steel rings, arms and pins. Precision molded made in U.S.A. to fit accurate. Stainless steel or brass also available.

3750 3750-1 1 1/2" MPT x Male Camlock
3750-2 2 MPT x Male Camlock
3750-3 1 1/4" MPT x Male Camlock
3755 3755-1 90 1 1/2" MPT x Male Camlock
3755-2 90 2" MPT x Male Camlock
3755-3 90 1 1/4" MPT x Male Camlock
3760 3760-1 1 1/2" FPT x Male Camlock
3760-2 2 FPT x Male Camlock
3760-3 1 1/4" MPT x Male Camlock
3765 3765-1 90 1 1/2" FPT x Male Camlock
3765-2 90 2" FPT x Male Camlock
3770 3770-1 1 1/2" Hose Barb x Male Camlock
3770-2 2" Hose Barb x Male Camlock

Female Camlock Adapters

3775 3775-1 1 1/2" MPT x Female Camlock
3775-2 2" MPT x Female Camlock
3780 3780-1 1 1/2" FPT x Female Camlock
3780-2 2" FPT x Female Camlock
3780-3 1 1/4" FPT x Female Camlock
3785 3785-1 90 1 1/2" FPT x Female Camlock
3785-2 90 2" FPT x Female Camlock
3790 3790-1 1 1/2" Hose Barb x Female Camlock
3790-2 2" Hose Barb x Female Camlock
3795 3795-1 90 1 1/2" Hose Barb x Female Camlock
3795-2 90 2" Hose Barb x Female Camlock

Camlock Plugs

3800 3800-1 1 1/2" Camlock Plug
3800-2 2" Camlock Plug

Camlock Caps

3801 3801-1 1 1/2" Cap
3801-2 2" Cap

Hose Barb Connectors

3805 3805-1 1 1/2" MPT x 1 1/2" Hose
3805-2 2 MPT x 2" Hose

Hose Bar Connectors

3810 3810-1 90 1 1/2" MPT x 1 1/2" Hose
3810-2 90 2 MPT x 2" Hose

6000 Series Pump Connectors

For 6000 Series Pump inlet and outlet. Special machined for close fit on hose.

3815 3815-1 6000 Suction Nipple
3815-2 6000 Discharge Nipple

Pottywand

Available to use with tapered nozzle or camlock. Also available in 1" size to fit into small places to get the job done right. Two sizes available with two different ends to choose from.

3825 3825-1 Taper Adapter x 1" PVC
3825-2 1 1/2" Male Camlock x 1" PVC
3825-3 Taper Adapter x 1 1/2" PVC
3825-4 1 1/2" Male Camlock x 1 1/2" PVC